Arcade Game 2 in 1 Switch Control JAMMA PC Board, GBS-8118

Now you can plug 2 different Jamma pcbs into one cabinet and select the game you want to play with the press of a Switch Control  ! To install just plug the pcb into your exisiting Jamma harness.  It install easily and working perfect.

PC to Jamma Converter
Install two different JAMMA (or non-JAMMA with the use of a JAMMA Adapter) PCBs into a single JAMMA cabinet with ease! This 2-in-1 MultiJAMMA switcher board is simple to install and works with just a quick press of the button. Included is a wired switch function.
This 2-in-1 MultiJAMMA Switcher board operates differently than the larger 6-in-1 MultiJAMMA Switcher board. First, both slots (1 & 2) are simultaneously powered on together unlike the 6-in-1 switch will only power on a single slot at once. This provides seamless quick switching between the two installed boards. Also this is a must if installing in a public game room (so the customer does not have to wait for the second game board to power on and test itself if selected…the game would already be up and ready to go).

Main Features:
Multiple input options (Inputs through JAMMA slots, VGA connections, RGB-S Connections, and L/R Audio inputs)
On initial power up, slot 1 automatically is enabled and plays.
Both slots power on together.
Switcher routes +5VDC, +12VDC, and -5VDC
Switcher routes SERVICE & TEST button functions, plus up to 4 shooter buttons per player.

This Kit contains:
2-in-1 MultiJAMMA Switcher PCB
Wireless remote switch
to toggle games

Setup is quick and easy:
1 – Install the 2-in-1 MultiJAMMA Switcher PCB into your JAMMA ready arcade cabinet (on cabinet floor is ideal if possible).
2 – Connect the 2-in-1 MultiJAMMA Switcher PCB into your JAMMA cabinets connector.
3 – Install your other JAMMA PCBs (or non-JAMMA PCBs with the use of a JAMMA Adapter) into one of the open 2-in-1 MultiJAMMA Switcher PCB slots (Slot farthest from the JAMMA connection is slot 1 / closest is slot 2). When plugging in the Jamma boards the front of the board (Front has the monitor port on it) goes to the front of the switch, the front of the switch has the two VGA input ports.
4 – Power on your cabinet and enjoy!

Technical Notes: This swicher is not fully compatable with the new 400-in-1 Pandoras V2 PCB board using VGA video. Works without issue on CGA monitors.

Here is the work around for it.
1. Purchase a Jamma extender for the blue elf board.

https://www.hollandcomputers.com/store/pc/Full-Jamma-Extender-Harness-for-your-current-JAMMA-Harness-all-56-pins-2516p8234.htm

2. Cut pins 12,13,14, N and P on the extender harness > These are the CGA output for that board. The Blue Elf board seem to output both CGA and VGA at the same time and this fix will prevent the switcher from using the CGA output when in VGA mode.

Monitor: If you are using a CGA monitor then you simply wire the monitor off of the Jamma harness, If you are using a VGA monitor then you have to set your Jamma boards to VGA then plug both of your Jamma boards VGA ports from the boards to the VGA input of the switch using a male to male VGA cord.

Click Here for wiring diagrams and manuals!

UPC: 765857429533

Warranty: 30 Day DOA exchange warranty only
Installation of this kit requires electronic experience, use at your own risk.

Works With:
Jamma 60-in-1 PCB, iCade, Arcade Multigame, Multicade board, JAMMA, Jamma PCB, Jamma 60-in-1, 60 in 1, Jamma Boards, 60 in 1 Arcade, 60 in 1 Jamma, 19 in 1 jamma, Jamma Arcade, iCade 60 in 1, iCade 60-in-1, Jamma 302-in-1, Jamma 302 in 1, Jamma 19-in1, Jamma 19 in 1, Jamma Board, Jamma Boards, Cocktail Arcade, Jamma Button, GBS-8118, Jamma switcher, Jamma Switch