Track Ball – 3 inch Arcade Game Trackball for Mame and Jamma boards with translucent white ball

Product Information
The RetroArcade.us Trackball with translucent white ball is an Arcade Quality trackball and will work with your Jamma board. The device will be automatically configured as soon as it is physically plugged into the Jamma board port. 

This is an excellent trackball for use with the 60-in-1 multigame units or 138/276-in-1 multigame units.*

*Interface harness is needed.
Works with all Jamma Board Technology based boards.

Technical Size:
Width: 5.25 Inches
Length: 5.5 Inches
Thickness: 2.5 Inches
Track Ball Hole Size: 3 Inches

*No harness is included – this is the trackball only

Click Here to view dimensions and mounting size!
UPC: 738435103422 – Arcade Game Track Ball
Click Here for wiring diagrams and manuals! 

Trackball Installation Instructions:

The Trackball must be mounted with label <- Monitor pointing to the left, as the user sees it.

Jamma 60-IN-1 board settings: specifically the System Settings, which are entered by powering on the board with the test switch on, need to be changed so that the Trackball Signal is corrected.  To do this, you need to change Row 2 Switch 7 to ON.  This will configure the Trackball Signal to Exchange DIR/CLK.

Jamma 60-in-1 PCB, iCade, Arcade Multigame, Multicade board, JAMMA, Jamma PCB, Jamma 60-in-1, 60 in 1, Jamma Boards, 60 in 1 Arcade, 60 in 1 Jamma, Jamma Arcade, iCade 60 in 1, iCade 60-in-1, Jamma Board

WARNING: This product can expose you to chemicals including Di(2-ethylhexyl) phthalate (DEHP), which is know to the State of California to cause cancer. For more information go to P65Warnings.ca.gov